Trivetek — Home network measurements | trivetek.com
Convert network units and calculate an ideal transfer time with overhead kept separate.
Network speed is measured in megabits per second (Mbps), while file sizes are usually shown in megabytes (MB). One byte contains 8 bits, so the conversion is a division by 8: 100 Mbps corresponds to a theoretical 12.5 MB/s before protocol and retransmission overhead.
To estimate an ideal transfer time, multiply the file size in megabytes by 8 and divide by the speed in Mbps. An ideal 250 MB transfer at 100 Mbps takes 20 seconds by 250 × 8 ÷ 100, before overhead. Treat the result as a floor, not a prediction.
On narrow screens, swipe or scroll the plate sideways.
Overhead is a separate subtraction. TCP headers, acknowledgements and retransmissions consume capacity, so the observed time exceeds the ideal figure. Keeping the two steps apart prevents a normal overhead gap from being misread as a line fault.
When comparing an advertised plan with a download manager, convert the plan to MB/s first, then compare. A 500 Mbps plan is 62.5 MB/s theoretical, and an observed 55 MB/s is consistent with overhead rather than a shortfall.
Write the conversion and the ideal time in your notes next to the observed value. That three-part comparison — theoretical, ideal, observed — is what makes a throughput number interpretable.
Further reading