Trivetek — Home network measurements | trivetek.com

Trivetek — Home network measurements | trivetek.com

Latency, jitter and packet loss

Read milliseconds and percentages as different measurements, not as one quality score.

Latency is a round-trip time reported in milliseconds. It describes delay, while throughput describes capacity, and the two can move independently: a fast line can still feel sluggish if round-trip time is high.

Jitter describes variation in latency rather than the average latency itself. A steady 80 ms round trip is often more usable for calls than a 30 ms average that swings between 10 and 120 ms, so report jitter beside the mean.

The signature mark of this site, drawn as a plate

On narrow screens, swipe or scroll the plate sideways.

Packet loss is the share of sent packets that do not arrive and is expressed as a percentage. Sustained loss forces retransmissions and reduces effective throughput.

Idle latency is measured on a quiet link; loaded latency is measured during a transfer. The difference between them exposes queueing in the router or modem, which an idle test cannot show.

Cloudflare explains that a useful test can measure latency, packet loss and latency variation alongside download and upload throughput. Reading all of them together is what separates a diagnosis from a single score.

  • Latency: round-trip time in ms
  • Jitter: variation in that time, in ms
  • Packet loss: share of packets that never arrive, in percent
  • Loaded latency: round-trip time during a transfer

Further reading